Obstet Gynecol Sci Search


Obstet Gynecol Sci > Volume 65(4); 2022 > Article
Thuwanut, Pimpin, Thatsanabunjong, Srisuwatanasagul, Sereepapong, and Sirayapiwat: A modified hydrostatic microfluidic pumpless device for in vitro murine ovarian tissue culture as research model for fertility preservation


This study aimed to compare the efficacies of conventional and non-conventional (modified hydrostatic microfluidic pumpless device, MHPD) systems on ovarian tissue culture and in vitro follicle growth using a mouse model. A total of 56 ovarian cortical tissues retrieved from seven wild-type mice were divided into three groups: 1) fresh control, 2) conventional culture system (control), and 3) non-conventional system with MHPD. Ovarian tissues were cultured for 96 hours and evaluated for follicle morphology, developmental stage, intact follicle density, and relative gene expression levels (proliferating cell nuclear antigen, insulin like growth factor 1, BAX, and Bcl-2). Our major data demonstrated that the mean percentage of primary follicle development was increased by the MHPD (P<0.05). In addition, this device could maintain and support follicle development better than the conventional culture systems. However, the overall outcomes were not significantly improved by our first-design prototype. Consequently, next-generation platforms should be developed as alternative medical tools for fertility preservation research.


Fertility preservation in cancer patients of childbearing age has grown expeditiously over the last decade [1,2]. Among the established fertility preservation techniques in women [1-3], compared to ovarian tissue transplantation, in vitro follicle growth (IVG) by ovarian tissue culture was recently introduced as an alternative approach to restore fertility without malignancy reintroduction [4]. In this method, ovarian cortical strips are cultured as flattened sheets under supporting matrix conditions [4-6]. The sequential change in culture media daily or on consecutive days is generally performed (static culture system) [7]. Although this technique allows tissues to maintain their microenvironmental properties, the static culture system lacks medium circulation that mimics natural vascularization [8]. To improve the culture system, non-static culture systems such as microfluidics have recently been introduced [8,9]. Conceptually, microfluidics is an engineered design of microscale devices that precisely manipulates fluid-flow dynamics using an external pumping machine [10]. A promising approach using microfluidics in reproductive medicine research was revealed in mice when the designed platform adequately supported isolated follicle growth and completed the first meiotic division [8]. In humans, the pre-antral follicle diameter was maintained after 8 days of in vitro culture using microfluidics compared to that with the static culture system [11]. However, in vitro ovarian tissue culture using microfluidics in human research models has not been reported. Additionally, the requirement for an external syringe pump in the currently designed microfluidic platforms presents disadvantages, that is, vast amounts of culture media is filled in the syringe or culture media temperature is uncontrollable [8,11]. Hence, our study aimed to preliminarily investigate the efficacy of microfluidics driven by a hydrostatic force (syringe pump-free device or modified hydrostatic microfluidic pumpless device [MHPD]) on in vitro ovarian tissue culture and IVG using mice as the research model.

Materials and methods

1. Animals, experimental design, and chemical substances

Wild-type institute of cancer research female mice at the anoestrous stage (age, 4 weeks; n=7) were caged under standard conditions. Ovaries were immediately collected from euthanized animals that were donated by another research project (approved by the Institutional Animal Care and Use Committee, Faculty of Medicine, Chulalongkorn University, Thailand). The ovaries were transported to the laboratory within 30 minutes. Eight ovarian cortical tissues from each mouse (total of 56 tissue fragments with an average size of 1.0×1.0×1.0 mm) were randomly divided into three groups (fresh control, conventional culture system [experimental control], and non-conventional system [MHPD]) and cultured for 96 hours. For the control, the tissues were placed on top of 1.5% (w/v) agarose gel submerged with 500 μL of culture medium (α-MEM medium with 5% fetal bovine serum, 1 IU/mL penicillin-streptomycin, 0.05 mM ascorbic acid, 0.5 μg/mL insulin, 0.4 μg/mL transferrin, 0.5 ng/mL selenium, 100 mIU/ mL follicle-stimulating hormone, and 0.1% polyvinyl alcohol) at 37°C in a humidified 5% CO2 atmosphere. The culture medium was replaced every alternate day. For MHPD, ovarian tissues were placed in the device culture chamber. A total of 1 mL of the culture medium was loaded into the tank reservoir and refilled every other day. The evaluation criteria were performed on days 1 and 5: histology (follicle morphology, developmental stage, and density) [12] and relative gene expression levels (proliferating cell nuclear antigen [PCNA], insulin like growth factor 1 [IGF-1], BAX, Bcl-2, and glyceraldehyde-3-phosphate dehydrogenase) by quantitative real-time polymerase chain reaction (quantitative polymerase chain reaction).
All the chemicals were purchased from Sigma-Aldrich (St. Louis, MO, USA).

2. Fabrication of the microfluidic device

The device was fabricated with polydimethylsiloxane using a soft lithography technique, and mainly comprised media flow channels (inlet and outlet) and a culture chamber (Fig. 1). The beginning of the inlet flow channel (1.0×1.0 mm; width×height) was connected to the culture media tank reservoir (cutting edge, 1 mL tuberculin syringe; 1 cm-height), whereas the terminal end of inlet flow channel was connected to the culture chamber. The semi-circular culture chamber was of 7.0 mm and 1.0 mm (width×height), connected with five filter tubes (0.5×0.04×2.0 mm; width×height×length) and a waste reservoir. When the tank reservoir was completely filled, the legitimated flow rates were as follows: 0-8 hours, 10−4-10−1 mL/min; 8-16 hours, 10−8-10−4 mL/min; and 16-24 hours, 10−12-10−8 mL/min (Fig. 1). The flow rate changed significantly when the length of the filter tube was varied. For example, the flow rate varied between 0.0002-0.002 mL/min when the filter length was changed to 20 mm.

3. Statistical analysis

Data analyses were performed using the Statistical Analysis Systems software package (SAS 9.2, SAS Institute Inc, Cary, NC, USA). When data were normally distributed, differences in dependent variables between groups were compared using a t-test. Non-normally distributed data were analyzed using the Wilcoxon signed-rank test. All results are presented as the mean±standard deviation. The level of significance was set at P≤0.05.


After ovarian tissue culture, the percentage of structurally normal follicles was significantly decreased during the culture period in both systems (P<0.05) (Table 1). The normal follicle morphology in the MHPD system on day 5 was ~2% lower than the control that of the control (static culture system). However, markedly different data were not observed between the groups (Table 1). In accordance with the follicle morphology observations, our findings indicated that the average of four intact follicles per 1 mm2-ovarian tissue area declined after culture (P<0.05). Regarding follicle developmental stage, the ratio between primordial follicles: primary stage follicles was slightly increased by the culture period (fresh control group [day 1], 1.0:0.37; control group [day 5], 1.0:0.48; MHPD group [day 5], 1.0:0.53). Although the percentage of primary follicles was increased by the MHPD culture system (day 1 vs. day 5) (P<0.05), this device could only maintain follicle development comparable to that of the control (Table 1).
The relative expression levels of target genes related to cell proliferation (PCNA), granulosa cell differentiation (IGF-1), and cell apoptosis (BAX and Bcl-2) were significantly increased by culture time (days 1 to 5) (P<0.05). An increase was observed in the expression levels of all target genes with average increases of 1.4 (PCNA), 1.6 (IGF-1), 1.4 (BAX), and 1.7 (Bcl-2) times in the control cohorts, and of 1.5 (PCNA, BAX, and Bcl-2) and 1.6 (IGF-1) times in the MHPD group. However, relative gene expression values did not differ between the two culture systems.


Our data from a mouse research model suggested that the current straightforward platform could maintain follicle viability, developmental competency, and gene expression levels related to cell proliferation and differentiation pathways, at levels comparable to those of the traditional static culture conditions. In the present study, microfluidics with hydrostatic pressure as the driving force to facilitate dynamic media flow was modified based on studies on human isolated follicles and mouse testicular tissue cultures [9,11]. Using this system, the culture media was stored in the reservoir tank and flowed through the microscale channels steadily (the average flow rate was 2 μL/min with a filter size of 2 mm). In male mice, development of round spermatid was accomplished with testicular tissue culture [9]. The development competency of mouse oocytes was enhanced by the passive dynamic culture system compared to that with the active dynamic system with an external pump or static control [13]. The contradictory results between the previous and present studies might be attributed to the inconsistent flow rate because of hydrostatic pressure, which was occasionally 2 to 4 times higher than that reported previously (1 μL/min [13] and average 0.5 μL/min [9]). A study on human embryonic stem cell-derived mesenchymal progenitors (human mesenchymal stem cells, hMSCs) categorized media flow rate into three levels: slow, fast, and rapid (12, 120, and 600 μL/min) [14]. The results showed that optimal dynamic flow prominently influenced hMSCs function [14]. In addition, the thickness of each tissue culture was noted. A previous study indicated that an optimal thickness of mouse testicular tissue is a prerequisite for round spermatid development during long-term culture [15]. The major explanation is related to the physiology of the natural thickness of the seminiferous tubules in mice [15], whereas a thickness of 1 mm of the ovarian cortex is suitable for pre-antral follicle growth. Owing to the lack of data on the influence of dent depth that dictates ovarian tissue thickness during in vitro culture, this aspect should be thoroughly considered. Consequently, a good agreement should be maintained between the device design, dynamic flow rate, and cell or tissue types to mimic the optimal in vitro microenvironment and gas and nutrient exchange for cell growth and development.
In conclusion, the present study preliminarily addressed the application of a pump-free microfluidic device for ovarian tissue culture and IVG in a mouse model. Regarding the fabrication of biocompatible devices with the designed dynamic flow, the current MHPD platform can only maintain follicle development competency. However, this device has some advantages, including simple architecture, ease of use, and medium-temperature control. However, a more accurate control of the flow rate using a well-designed resistance circuit (length, height, and width), tank reservoir, or insertion of an internal electromagnet valve should be further developed to create an adequate milieu for long-term culture. This promising technology presents a clear opportunity for cancer patients to preserve their fertility.


Conflict of interest

The authors declare no conflicts of interest.

Ethical approval

Institute of Animal Care and Use, Faculty of Medicine, Chulalongkorn University

Patient consent


Author contributions

All authors designed the experiments while A.P. and P.T. designed microfluidic device. P.T. and F.T. performed the experiments. P.T., A.P. and P.S. prepared and revised the draft of manuscript.

Funding information

This study was financially supported by the Research Unit of Reproductive Medicine and Fertility Preservation, Faculty of Medicine, Chulalongkorn University, Thailand.

Fig. 1
(A) Fabrication of a modified hydrostatic microfluidic pumpless device (MHPD) using (a) design based on a 3D-printing aluminum mold, (b) casting of polydimethylsiloxane (PDMS), (c) glass bounding, and (d) insertion of inlet and outlet tubes; (e) demonstration of aluminum mold and MHPD after fabrication. (B) Schematic illustration of a MHPD for culture media-flow rate calculation with different filter lengths and reservoir tank initial heights.
Table 1
Follicle quality assessment and developmental stages in mouse ovarian tissues that were cultured in vitro using two different systems, static culture (control) and non-static culture (MHPD) systems (n=7 animals)
Parameter Fresh control (day 1) In vitro culture (day 5)
Control MHPD
Follicle quality
 Morphologically normal follicles (%) 79.8±1.3a) 73.9±2.1b) 71.5±1.5b)
 Follicle density (number of intact follicles/mm2) 31.6±1.3a) 27.9±0.6b) 27.6±1.9b)
Follicle developmental stage
 Primordial follicle (%) 59.7±1.5a) 55.1±2.4a) 54.7±3.2a)
 Primary follicle (%) 22.6±3.7a),b) 26.8±3.6a),b) 28.9±2.8b)
 Preantral follicle (%) 17.7±3.5a) 18.1±3.7a) 16.4±2.9a)

Values are presented as mean±standard deviation.

MHPD, modified hydrostatic microfluidic pumpless device.

a,b) Different letters indicate statistical differences within the same row (P<0.05).


1. Ataman LM, Rodrigues JK, Marinho RM, Caetano JP, Chehin MB, Alves da Motta EL, et al. Creating a global community of practice for oncofertility. J Glob Oncol 2016;2:83-96.
crossref pmid pmc
2. Anderson RA, Wallace WHB, Telfer EE. Ovarian tissue cryopreservation for fertility preservation: clinical and research perspectives. Hum Reprod Open 2017;2017:hox001.
crossref pmid pmc
3. Obermair A, Baxter E, Brennan DJ, McAlpine JN, Muellerer JJ, Amant F, et al. Fertility-sparing treatment in early endometrial cancer: current state and future strategies. Obstet Gynecol Sci 2020;63:417-31.
crossref pmid pmc pdf
4. Telfer EE. Future developments: in vitro growth (IVG) of human ovarian follicles. Acta Obstet Gynecol Scand 2019;98:653-8.
crossref pmid pdf
5. Smitz J, Dolmans MM, Donnez J, Fortune JE, Hovatta O, Jewgenow K, et al. Current achievements and future research directions in ovarian tissue culture, in vitro follicle development and transplantation: implications for fertility preservation. Hum Reprod Update 2010;16:395-414.
crossref pmid pmc
6. Filatov MA, Khramova YV, Kiseleva MV, Malinova IV, Komarova EV, Semenova ML. Female fertility preservation strategies: cryopreservation and ovarian tissue in vitro culture, current state of the art and future perspectives. Zygote 2016;24:635-53.
crossref pmid
7. Salama M, Woodruff TK. From bench to bedside: current developments and future possibilities of artificial human ovary to restore fertility. Acta Obstet Gynecol Scand 2019;98:659-64.
crossref pmid pdf
8. Xiao S, Coppeta JR, Rogers HB, Isenberg BC, Zhu J, Olalekan SA, et al. A microfluidic culture model of the human reproductive tract and 28-day menstrual cycle. Nat Commun 2017;8:14584.
crossref pmid pmc pdf
9. Komeya M, Hayashi K, Nakamura H, Yamanaka H, Sanjo H, Kojima K, et al. Pumpless microfluidic system driven by hydrostatic pressure induces and maintains mouse spermatogenesis in vitro. Sci Rep 2017;7:15459.
crossref pmid pmc pdf
10. Sackmann EK, Fulton AL, Beebe DJ. The present and future role of microfluidics in biomedical research. Nature 2014;507:181-9.
crossref pmid pdf
11. Aziz AUR, Fu M, Deng J, Geng C, Luo Y, Lin B, et al. A microfluidic device for culturing an encapsulated ovarian follicle. Micromachines (Basel) 2017;8:335.
crossref pmid pmc
12. Lo BKM, Sheikh S, Williams SA. In vitro and in vivo mouse follicle development in ovaries and reaggregated ovaries. Reproduction 2019;157:135-48.
crossref pmid pmc
13. Sadeghzadeh Oskouei B, Pashaiasl M, Heidari MH, Salehi M, Veladi H, Ghaderi Pakdel F, et al. Evaluation of mouse oocyte in vitro maturation developmental competency in dynamic culture systems by design and construction of a lab on a chip device and its comparison with conventional culture system. Cell J 2016;18:205-13.
pmid pmc
14. Campos Marín A, Brunelli M, Lacroix D. Flow perfusion rate modulates cell deposition onto scaffold substrate during cell seeding. Biomech Model Mechanobiol 2018;17:675-87.
crossref pmid pmc pdf
15. Komeya M, Yamanaka H, Sanjo H, Yao M, Nakamura H, Kimura H, et al. In vitro spermatogenesis in two-dimensionally spread mouse testis tissues. Reprod Med Biol 2019;18:362-9.
crossref pmid pmc pdf
Share :
Facebook Twitter Linked In Google+ Line it
METRICS Graph View
  • 0 Crossref
  •     Scopus
  • 386 View
  • 39 Download
Related articles in Obstet Gynecol Sci

Article category

Browse all articles >


Browse all articles >

Editorial Office
4th Floor, 36 Gangnam-daero 132-gil, Gangnam-gu, Seoul 06044, Korea
Tel: +82-2-3445-2382    Fax: +82-2-3445-2440    E-mail: journal@ogscience.org                

Copyright © 2022 by Korean Society of Obstetrics and Gynecology.

Developed in M2PI

Close layer
prev next